technical data datasheet 5288 , rev - ? 20 1 3 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 tel: (631) 586 - 7600 ? fax: (631) 242 - 9 798 ? www.sensitron.com ? sales@sensitron.com sda1002 ss sda1003 ss diode array ? devices are serialized ? built and screened to space level quality ? space quality level conformance testing is performed on each lot ? sda 100 2 C internal diodes are 1n6638 (mil - prf - 19500/578l) ? sda1003 - internal diodes are 1n6642 (mil - prf - 19500/57 8l) max. rati ngs / electrical characteristics for each diode all rating at are t a = 25 o c unless otherwise specified rating symbol max unit peak inverse voltage (dc) sda 1002 sda1003 piv 150 100 v average dc output current t a = 55 o c t a = 100 o c i o 0.30 0 .16 a peak single cycle surge current (tp=8.3ms single half - sine wave ) i fsm 2.5 a max. operating junction temperature t j - 55 to +150 o c max. operating ambient temperature t op - 30 to 100 o c storage temperature range t stg - 65 to +175 o c maximum forward voltage sda 1002 @ 2 00m a sda 1003 @ 100ma v f 1. 2 1.3 v maximum instantaneous reverse current at rated (piv) sda 1002 , t a = 25 o c sda 1002 , t a = 100 o c sda 1003 , t a = 25 o c sda 1003 , t a = 100 o c i r 35 50 0 25 500 ? a max. reverse recovery ti me i f = 10ma, i r m = 10m a t rr 5 ns max capacitance, f= 1mhz, v ac = 50mv v r = 1.5v c t 3 pf thermal resistance junction to case r ? jc 250 o c/w
technical data datasheet 5288 , rev - ? 20 1 3 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729 - 4681 tel: (631) 586 - 7600 ? fax: (631) 242 - 9 798 ? www.sensitron.com ? sales@sensitron.com sda1002 ss sda1003 ss electrical schematic mechanical outline disclaimer: 1 - the information given herein, including the specific ations and dimensions, is subject to change without prior notice to improve product characteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department for the late st version of the datasheet(s). 2 - in cases whe re extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, m edical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or b y means of users fail - safe precautions or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the users units according to the datasheet(s). se nsitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4 - in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5 - no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron se miconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of sensitron semiconductor. 7 - the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
|
